Shipping throughout Russia and to other countries

Gas filters TEXPROMGAZ FGS-50, FGV-150, FG-80, etc.

Gas hair filters FGV-50, FGV-80, FGV-150
    Gas hair filters FGV-50, FGV-80, FGV-150 are designed to purify natural gas from mechanical impurities in order to prevent clogging of pulse tubes, throttle openings, as well as wear of shut-off and gas control valves in gas control points and installations. The filter is used at the entrance of gas supply systems as part of hydraulic fracturing in rural or urban settlements and industrial and agricultural facilities. The operating conditions of the filters correspond to the climatic version of UHL2 according to GOST 15150-69 with an ambient temperature from minus 40oC to plus 45oC.
Gas mesh filters FGS-50, FGS-50U
    Gas mesh filters FGS-50, FGS-50U are designed for cleaning non-aggressive gases and air from mechanical impurities (scale and dust) that erode the sealing surfaces of pressure regulator valves, safety valves, shut-off valves, as well as clogging and disabling pulse communications and devices. Filters are installed on low, medium and high pressure gas pipelines. The operating conditions of the filters correspond to the climatic version of UHL2 according to GOST 15150-69 with an ambient temperature from minus 40oC to plus 45oC.
Gas mesh filters FG-50, FG-80, FG-100, FG-150
    The filters are designed for use in gas supply systems for the purification of natural gas according to GOST 5542-87 and other non-aggressive gases and air from mechanical impurities and moisture. Filter housings are pressure vessels and belong to the 1st group of vessels according to PB 03-576-03 p. 4.5.2. The operating conditions of filters in terms of exposure to climatic factors must comply with the climatic version of UHL2 GOST 15150-69, but with ambient temperature from minus 40 ° C to plus 45 ° C with relative humidity (95 ± 3)% at plus 30 ° C.
DOCUMENTATION

All TEXPROMGAZ products

The group "New Technologies" offers for review the products of the plant TEXPROMGAZ: gas control points, gas pressure regulators, gas flow metering points, gas filters, safety valves, insulating connections
  • Gas control points 02-07 TEXPROMGAZ
    Gas control points 02-07
    GRPSH-04-2U1, GRU-03BM-2U1, etc.
  • Ball valves TEXPROMGAZ
    Ball valves
    KSH-50, etc.
  • Gas control points 01 TEXPROMGAZ
    Gas control points 01
    GRPSH-01-U1, GRPSH-400, PGB-07-U1
  • House regulatory points TEXPROMGAZ
    House regulatory points
    GRPSH-6, GRPSh-10, GRU-32, etc.
  • Gas control points 13-16 TEXPROMGAZ
    Gas control points 13-16
    GRPSH-13-1NV-U1, GRU-15-1NV-U1, etc.
  • Insulating connections TEXPROMGAZ
    Insulating connections
    SI 20r, IS-80, IFS-32-10, etc.
  • Gas filters TEXPROMGAZ
    Gas filters
    FGS-50, FGV-150, FG-80, etc.
  • RDSK Gas Pressure Regulators TEXPROMGAZ
    RDSK Gas Pressure Regulators
    RDSK-50M, RDU-32, RDG-150N, etc.
  • RDGC Gas Pressure Regulators TEXPROMGAZ
    RDGC Gas Pressure Regulators
    RDGC-10M, RDNA-32, RDNA-400, etc.
  • Gas control points 32/3-10 TEXPROMGAZ
    Gas control points 32/3-10
    GRPSH-32/3BO, GRU-32/10BO, etc.
  • Gas control points 300 TEXPROMGAZ
    Gas control points 300
    GRPN-300-10-0.3 , GRU-300-4-1.2 etc .
  • Gas-heated points TEXPROMGAZ
    Gas-heated points
    GSGO-00(01-13), GRU-00(01-13), etc.
  • Gas flow metering points TEXPROMGAZ
    Gas flow metering points
    PUG, PURG, SHUURG, BUURG, etc.
  • Safety valves TEXPROMGAZ
    Safety valves
    KPS-N, PSK-50N, KPZ-100N, etc.
  • RDBK Gas Pressure Regulators TEXPROMGAZ
    RDBK Gas Pressure Regulators
    RDBK1-50, RDGB-6, RDGD-20M, etc.

About TEXPROMGAZ

The main activity of the company TECHPROMGAZ is the production of industrial gas equipment. All manufactured equipment has certificates of conformity and a permit for use issued by the Federal Service for Environmental, Technological and Nuclear Supervision. The company produces safe products and fulfills all the necessary requirements established by standards and other regulatory acts of the Russian Federation.

  • ENVIRONMENTAL FRIENDLINESS

    Only safe technological processes and materials that do not have a negative impact on the ecological state of the environment are used for the manufacture of gas equipment.

  • QUALITY CONTROL

    All manufactured products undergo 100% quality control through various test methods, according to the requirements of technical documentation.

  • SPECIALISTS

    The company employs qualified specialists who can professionally advise on issues related to the production, installation and operation of industrial gas equipment.

Information Board TEXPROMGAZ

Learn more about our products TEXPROMGAZ.
  • Questionnaire for gas control points производства ТЕХПРОМГАЗ
    Questionnaire for gas control points
  • Questionnaire for gas consumption metering points из каталога ТЕХПРОМГАЗ
    Questionnaire for gas consumption metering points

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: